Glass processing
Grinding, drilling
and CNC processing.
CNC processing to your drawings or ours. Maximum size 4000 × 2500 mm without holes or notches, and 2900 × 1450 mm with holes or notches.
Benefits
What you get
01
The edge you need
Grinding through diamond wheels of increasing fineness, up to a polished edge.
02
Holes and notches
Drilling and notches for hinges, locks, handles and fixings. To your drawing or the hardware manufacturer’s drawing.
03
Irregular shapes
Our CNC machines grind and drill irregular shapes from a DXF drawing.
Production · CNC
Machines, sizes
and tolerances.
Grinding on vertical straight-line edgers and CNC machining centres.
Machines and sizes
| Edge grinding | Thicknesses 3–25 mm · minimum 260 × 320 mm · maximum 2500 × 4000 mm |
| Edge types | Arrised, ground, polished |
| CNC processing | Maximum 1450 × 2900 mm, thicknesses 4–12 mm |
| Cut-outs | Internal cut-out, edge notch, corner notch |
Holes and tolerances
| Holes in toughened glass | Requirement |
|---|---|
| Hole diameter | At least equal to the glass thickness |
| Glass edge to hole edge | At least 2 × thickness |
| Between two holes | At least 2 × thickness |
| Glass corner to hole edge | At least 6 × thickness |
| Dimension | Tolerance |
|---|---|
| Grinding and polishing | ± 1 mm |
| Hole 4–20 mm | ± 1.0 mm |
| Hole 20–100 mm | ± 2.0 mm |
| Cut-out size | ± 2.0 mm |
| Hole position | ± 1 mm/m, at least ± 2.5 mm (glass up to 12 mm) |
Tolerances to EN 12150-1. The full Eurostaklo Factory Standard is available on request.
Production
From the factory floor
Related products
Glass processing